Water Heater Repair Nashville's Blog

Nashville TN Homeowner advice and maintenance tips for water heaters.

Repairing a Leaking Water Heater

A leaking water heater may or might not look like a significant deal. However, it does not matter if it is a large leak or a minor leak, both may lead to a whole lot of damage to ones household in the form of water damage. Regularly property owners neglect to understand that a tiny leak is often the warning sign of something much bigger that may be beginning to take place, or may happen in the near future. In the worse situation, that little leak could turn out to be a significant flood if the water heater is close to completely giving out. At any rate, we are right here for helping with any sort of Nashville Hot Water Heater Repair which may be needed.

As well as water damage to ones residence by a leaking storage tank, there are actually health related concerns with any kind of water leak in a household. The wetness can lead to mold or mildew growth. People who are afflicted by allergies or asthma, this isn’t an enjoyable problem. The EPA alerts that some mold spores are hazardous and may lead to significant health conditions.

Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.  http://www.cdc.gov/mold/dampness_facts.htm

In hopes that an ongoing water leak will mend itself and simply just go away is a thing that just doesn’t happen sad to say. Plumbing leaks only become worse over time. We have composed a step-by-step list of measures to take during these situations.

Action Steps for Leaking Water HeatersLeaking Nashville Water Heater

1. First make sure that its the water heater that the leaking water is coming from.

If one experiences water around where the hot water heater is located, the leak might not always be coming from it. Examine all water pipes or other items around where the heater is found. Are there some other equipment near it that will form condensation? If ones heater is located inside a basement, this can be the case. It could sometimes be a furnace drain line too, or coming from a water softener.

First, wipe up the water and examine if it comes back any time in the near future by watching the place periodically. Look over the water heater totally to see if any water is coming from any of the fittings, T&P valve, or drain valve. If fully dry, continue to observe different things and areas close by.

If nothing else is wet in the general region, put paper towels down in the spot that was already wet. Take a look at it every hour roughly to make certain the paper towels continue to be dry. It will probably be a lot easier to notice the paper towels getting wet then the ground. Following a day if nothing is wet again, there ought to be absolutely nothing to concern yourself with, yet still keep a watch on it for a few days. If water is coming back again, and there is not any other origin in close proximity that it might be from, we will proceed to the step two at this point to diagnose the origin of the leak.Breaker Box for Nashville Water Heater

2. Turn the water heater’s power off

Hopefully, it is common knowledge that water and electrical energy never go well with each other, so shut off the power for safety explanations.

For gas water heaters, there should be an on/off dial that should be established to the off placement. Leave the gas line on right now still.

For electric heaters, head over to the property’s circuit breaker box and shut off the breaker of the water heater.

3. Shut the water supply off

If one is sure that the leak is because of the hot water heater, and in the event it is reasonably substantial, turning the water off will remove the possibility of water continuing to fill the storage tank and leak inside ones home. Once more, with a big leak coming from the heater, and if the shut off valve cannot be reached or if it is actually not working accurately, go find and turn off the main disconnect valve for the entire property. If one remains unclear the leak is coming from the water heater, one will be able to leave the water supply on at the moment.

One should be aware that water coming from the storage tank is going to be hot and might burn ones skin. Most heaters will be set to a temperature of at the very least 120° F, which is able to result in first degree burns on contact.

4. Determine the leak’s position

We really do not need our Nashville water heater clients to self diagnose their leaks ahead of calling us, notably when there is a critical water leak scenario occurring, but the more one can the quicker we can help. Next is a summary of possible explanations why the leak is happening.

Leaking Water Connections
Test to be certain the cold water inlet as well as the hot water outlet connections are not loose. They’re usually located at the top of the storage tank. Make use of a pipe wrench to confirm they are tight. This is a basic fix if perhaps this is from where the leak is coming.

Leaking T&P Valve
Found on the side of the storage tank is the temperature and pressure relief valve. It is going to in addition have a drain pipe running down to the floor from it. The valve manages the volume of pressure which accumulates inside the storage tank. It is going to let water out when it must regulate the pressure. This valve may be the origin of the leak and could need replacing if it fails to stay shut securely. Look to see if any water is leaking via the valve. If water is originating from the valve while its in the shut position, a new valve will be necessary. This is an important valve of the water heater, and one that needs to function accurately. However, updating it is simple enough and not costly.

Danny Lipford suggests that:

Pressure relief valves sometime develop a drip when opened for the first time in years. Try opening and closing it a few times to see if it will seat itself. http://www.todayshomeowner.com/repair-leaking-water-heater-pressure-relief/

First, experiment to see if there could possibly be dirt in the valve. Set a pail underneath the discharge tube and open the valve by lifting the handle on the valve. The water that is drained may rinse the valve out and clear away any kind of debris that might be in the way.Leaking Water Heater Drain Valve

Other factors regarding a T&P valve leak might be high water pressure in the municipal water system, or by a backflow preventer positioned around the water meter.

Leaking Drain Valve
Examine the drain valve towards the bottom of the heater. They’re typically composed of plastic, and for that reason, might break in the long run. Be certain that it is shut tight. If the drain valve needs changed, it is a quick fix.

A drain valve leak might be the result of dirt inside of the valve. Try this first. Put a pail under the valve and turn the dial to open it. Emptying some water may well eliminate the debris. If after flushing, it continues to leak, it’ll need to be replaced.

If the leak is coming from here and the valve keeps leaking because it requires replaced, try connecting a garden hose to it and run the hose outdoors. Hopefully that could get rid of the water leaking indoors.

Leak on the bottom of the tank
If the tank leaks at the bottom, it usually means there is a significant internal concern. Because of the way the water tank is designed, being covered inside insulation and possessing an external layer, whenever it is leaking, it will probably not be observable from the outside. An interior water leak ordinarily is going to be noticeable in the bottom of the tank. The more aged the tank is, the more probable it is starting to rust and deteriorate. A rusting tank will need to get exchanged.

5. Will I require a repair or replacement water heater?

From our working experience, we are able to conduct a repair to correct the leak, a lot more often then needing to replace ones heater. The more quickly we could take a look at the situation, the faster we can accomplish a repair ahead of the damage becoming any worse. We do highly advocate that any sort of repairs or replacements be performed by a pro and not oneself, to ensure they are executed properly and up to code. Many times, manufacturer warranties may be voided in cases where a non-licensed person works upon it.

Quick Water Heater Maintenance Steps

Feel like rolling up your sleeves and doing some water heater maintenance today? It will not likely take very long. . .in fact we were thinking of ten minutes. Yes, that could be as long as it will take to discuss two maintenance duties that any house owner can execute. The best part is they may help Nashville homeowners with the following:Nashville Water Heater Maintenance Steps

Ensuring ones water heater last as long as possible, saving expenses.
By ensuring ones water heater runs properly.
Ensuring that it operates as energy efficiently as possible, also conserving money.

So with that in mind, let us educate you on how to invest 10 minutes once or two times a year to help prevent any water heater repairs for your Nashville water heater.

T&P Valve Examining

The task of the temperature and pressure relief valve, also referred to as the T&P Valve, is very essential. It has the critical task of ensuring that extra pressure will not establish inside of the storage tank, which will guarantees the water heater does not explode. The infographic following indicates the following actions in evaluating it. The handle must be raised some and then release it. It should snap back to its closed placement immediately. When it’s operating properly, some water may be heard moving into the drain pipe beneath the handle that was previously lifted and the noise of some pressure discharged is possibly observed. One will need a new valve if perhaps non-e of these items occur in the course of the test.

Flushing Some of the Water from the Water Heater

WIth time, rust and sediment will develop on the inside of the water tank on account of the chemical reactions happening with the parts that are necessary to heat up water. We are not planning to go directly into the complex chemical details in this article, but by flushing a little of the water, it can help get rid of the sediment, and supply the opportunity to discover what amount of sediment is within the water heater.

To perform a tiny flush, place a container underneath the drain valve, situated on the bottom part of the tank, and open the drain valve. Simply drain a few gallons of water – a couple containers full. Allow for the water to sit in the final bucket for several minutes. After it settles, evaluate to learn how much sediment has settled to the bottom of the bucket. If there is, if the water heater has actually not been drained for a long time (or ever), it would be best to do a complete flush of the tank to get as much of the sediment out as possible.

Examine how clean the water appears. When it does not look too unclean just carrying out the mini flush will likely be alright. When there is a whole lot of sediment in the water a complete flush needs to be conducted. If you’re sure it has not been drained for some time, if ever, it would be advisable to drain it all.

We can not go straight into all the measures right here to do so, however for educational purposes, initially decrease all the way the temperature. Wait at the very least 1 hour to allow for the water to cool down prior to draining it. In place of making use of the pains, it is much easier to connect a garden hose to the drain valve and let the water go outdoors.

If one starts to be aware of strange popping noises from the water storage tank, it happens to be a sign that there may be a large level of sediment accumulating on the inside. This also significantly reduces the energy efficiency of the water heater.

Water heaters will operate well without very much maintenance, and quite a few homeowners tend not to complete any maintenance to them. But, to realize the 3 rewards listed in the beginning of the article, it is crucial to at a minimum complete these two duties. If you have any queries or believe you want some help initially, let us know! We are always here to assist and to help prevent an unwanted Nashville Water Heater Repair.

Water Heater Repair Nashville TN

From Visually.

Best Water Heater Temperature Level

An element with ones water heater which a large number of Nashville homeowners has likely definitely not considered a lot regarding is the temperature setting. What precisely is the ideal temperature level for the hot water in ones household? In this post Water Heater Repair Nashville will examine the benefits and drawbacks of various configurations for property owners to decide on what is going to work most effectively for them and their family, for there could be various health dangers which should be taken into consideration.

Many water heater suppliers preset the temperature of their hot water heaters to 140 degrees. If you have gotten the heater in your property installed or changed while residing there, this might be exactly what it is presently set at if you never have adjusted it. It might be tough to find out precisely what the true temperature is on quite a few water heater units for the dial is referred to as as warm, hot, really hot. We are certain it looks like a wonderful advertising option to market water heaters that have the ability to heat water to 1000 degrees, however we will discover that it is incredibly unneeded.

In the event that the temperature dial don’t have degrees written upon it, fill up a glass of hot water from a faucet and put a cooking thermometer inside it and examine the temperature level.

Energy Saving Costs With Nashville  Water Heater Temperature Settings

It happens to be thought that through shifting the setting from 140 to 120 degrees can preserve between six to ten % of the energy utilized from the water heater. In money, this would allow $6 to $20 each year in cost savings. The U.S. Department of Energy says a temperature setting of 120 is an excellent method to lower home energy costs.

If in the end of the article one believes an even lower temperature setting is secure for ones house, subsequently the cost benefits may well be more than mentioned previously.

Potential Health Risks With Water Heater Temperature Settings

As the infographic beneath reveals, there could be health threats if the hot water temperature is too cool. Legionella bacteria is the possible unsafe factor to take into consideration. It could possibly grow in the temperature spectrum of 68 to 122 degrees. Therefore, if ones water heater is placed beneath 122 degrees, there exists the chance it may grow within ones hot water heater storage tank.

How is Legionella bacteria harmful? A type of pneumonia may be transferred if an individual breathes water that Legionella bacteria has contaminated. This tends to normally occur when inhaling water moisture by a shower. Consuming the water is commonly alright.

About 8,000 to 18,000 Americans catch this annually states the Centers for Disease Control and Prevention, and 5 to 30 % of such instances result in death. This is not intended to frighten anyone, but just as a valuable suggestion for all those that may very well be far more susceptible to getting Legionella Disease.

According to OSHA, “At low levels of contamination, the chance of getting Legionnaires’ disease from a water source is very slight. The problem arises when high concentrations of the organism grow in water systems. Water heaters, cooling towers, and warm, stagnant water can provide ideal conditions for the growth of the organism.”  (read more)Nashville Water Heater Repair

Motives to Reduce Water Heater Temperatures

One of several arguments to never have ones water heater established close to 140 degrees is the risk of becoming scalded or burned by the water. For Nashville house owners that have small children or aged adults, this ought to be taken into account. The Consumer Product Safety Commission (CPSC) recommends a setting of 120 because of factors. There are today bath faucet slip covers that have a LED temperature reading that happen to be helpful as well!

When reducing the temperature setting, look at the dishwasher manual learn what the lowest water temperature level is for it. Various units require it to be fairly high.

This really is a challenging subject to settle Hot Water Heater Repair Nashville realizes. We trust the details in this article and the infographic underneath will help instruct our Nashville neighbors and clients on the preferred water heater temperature discussion.

Hot Water Heater Repair Nashville TN

Total Water Heater Maintenance Tasks

Water Heater Repair Nashville is not about to discuss the unhappy tales concerning water heater maintenance of “awakening to the freezing bath,” here. At the same time, we shall presume that one realizes the straightforward notion of being sure ones water heater is maintained routinely in an effort to receive the most from its expected life. This helps one reduce costs on power costs as well. All of that is smart we understand. Though hot water heaters do not require a lot regarding maintenance (and we are astounded, even though not shocked, by the sheer number of customers we come across who haven’t executed anything to their water heater), following are the responsibilities individuals must keep in mind when it comes to routine maintenance.

How Long Should My Nashville Water Heater Last?

The normal gas water heater lasts 8 to 10 years. There are lots of things that could influence the all around life expectancy needless to say, however this is an effective standard. Quite possibly the most important factor that can influence the long life of it is normally mineral deposits. A lot of of the responsibilities in this article should go a long way in assisting to lower the accumulation of mineral deposits in the storage tank of the water heater.

Nashville Water Heater Repair PreventionHot Water Heater Repair Nashville

House owners, even people which don’t feel too handy, can do a whole lot of water heater routine maintenance by themselves. While in most cases, water heaters are safe and sound, it is crucial to note that they actually do work from electric power and/or gas, consequently good safety measures ought to be put into practice. Be sure to employ all these measures as an instructional tutorial, for we’d much rather discuss all these together with you directly. The electrical power to the water heater requires to be switched off ahead of performing any routine maintenance. Ones breaker box ought to have a preferably labeled switch to point out which breaker is the heater’s. With a gas heater, move the gas cutoff counterclockwise to shut off the gas to the heater.

The element of the heater that aids with reducing rusting inside of the water storage tank are the anode rods, or additionally named sacrificial anode rods. Nearly all are manufactured from aluminum or magnesium around a steel wire. In time the external covering of the rods will erode and they really should be replaced when the steel wire is observable. They typically last around 5 years, though that might be reduced if ones water is soft. Ultimately, it is better and less costly to have the anode rods changed, so that one can acquire an extended life from the water heater storage tank. The rods should really be checked out once a year basis.

The follow video does a very good job of demonstrating the method needed with replacing the anode rods:

Not every water heater has dip tubes. They must be examined for deterioration every 6 months. To evaluate it, take it out and evaluate its length to the height of the water heater. It needs to be somewhere around 6″ to 8″ shorter compared with the tank. Whenever it’s smaller than that, or simply reveals clues of breakage or falling apart, it’ll need to get changed.

The big and small flush. Once more, mineral deposits are the prominent reason of water heater malfunctions. Based on the level of quality of water in ones residence will establish exactly how rapidly sediment will establish inside of the storage tank. This sediment can solidify in time, leading to unexpected popping sounds from the storage tank, greatly reduce the effectiveness of the water heater, and perhaps clog up the drain valve. If possible, every 6 months, but at the least every year, empty 1 or 2 gallons of water from the drain valve in the bottom of the hot water heater in a pail or by a hose in a container outside the house. Look to check out the amount of sediment is within the pail after the water settles. If it seems pretty clear, that great! When these kinds of small flushes are carried out 2 times yearly, one may well not need to conduct a big flush as frequently. If the water seems to be very dirty, a full flush ought to be conducted. It is likewise a great occasion to be certain the bottom drain valve of the storage tank is functioning properly and not leaking. Most are normally composed of plastic and in time when they aren’t opened up, they may get stuck or not close up firmly, so opening and closing them in the course of the small flush test is very good.

There can be unique measures one could take while flushing to handle any specific water smells that can appear when hot water comes from faucets within the residence also.

This video demonstrates exactly how and advantages for a water heater flush:

Regarding holiday or temporary residences, one will need to empty the storage tank of all its water in order to avoid any kind of flooding when the household is not being occupied. Clearly, be certain to fill it up while the house is to be resided in once again.

Water pipe inspection. Look to make certain all water piping have no leaks or are impaired at all. This should be straightforward to see when there are any leaks with any piece of the water plumbing or storage tank for it will have water below and/or near the device. Leaking water can result in water damage to areas of ones property, so make certain all seems dry, primarily if the heater can be found within the dwelling and not in a garage.Nashville Water Heater Repair

T&P valve check up. The T&P valve, referred to as the temperature and pressure relief valve, must be looked at annually. The goal of the T&P valve would be to secure the water heater storage tank from too much pressure, and exploding, not to frighten everyone. The owners handbook must be looked over to make certain the right measures are used but listed here are the common actions. A little water may come out of the valve and it will probably be really hot so be mindful. Raise the handle and let go of it. Have a container available to catch any extra water which may come out. When the handle is lifted, the noise of pressure getting discharged will be noticed. The handle will need to snap back into position. In the event that it won’t give it a try once more. In cases where it will not go back again into position following a number of attempts, it is going to have to be changed. The valve may possibly drip a little water after doing that for a short period of time. If it fails to discontinue dripping after a couple of hours contact us.

There does exist a lot of discussion on what the perfect temperature setting needs to be. The manufacturer pre-programmed setting is commonly 140 degrees, which is indeed warmer than almost all people definitely will ever have to have. 120 degrees is the usual temperature and a number of people also go as far as 100 degrees. We’ll be publishing much more on this matter in the near future, but we propose not going over 120 degrees.

Just For Gas Water Heaters

The gas venting system requires being checked each 3 months. Verify to ensure all fittings are tight and for obstructions and harm to the vent pipes and also making certain they’re absolutely free of rust and deterioration .. Gas fired hot water heaters vent fumes to the outdoors of the dwelling. If these fumes flow indoors of the household it might be poisonous and a fire threat. Make certain everything combustible or corrosive is faraway from the exhaust ventilation to aid the prevention of fires. Change all loose, broken or corroded areas of vent pipes.

Check out the pilot light to conduct a visual analysis of the way it is working. The pilot light is the element that ignites the gas burner that will heat the water. A clean burning and correctly adjusted pilot light is necessary for your water heater to function at peak efficiency. The color of the flame of the pilot light should really be blue with natural gas heaters or blue/green with just a bit of yellow at the tip with propane heaters. A short flame, a yellow flame, or a flame with a divided flame at the top indicates that a modification is necessary.

Just For Electric Water HeatersWater Heater Repair Nashville

Implementing insulation wraps or covers around the storage tank can certainly help retain a regular temperature inside of the storage tank without the need for as much energy. Moreover, with the heater not needing to perform as often will increase the life span of the heating element due to the fact it will not be put to use as much. Every 3 months roughly, take a look at to be sure the insulation wrap is attached good and hasn’t fallen or shifted on the water storage tank.

Routine evaluation of the heating element is really important and definitely will help cut down on the need for an unexpected repair. We aren’t going to get into the specifics for a total assessment right here, however one will require a voltage/OHM meter to guarantee there does exist a closed electrical circuit. Heating elements will need updating from time to time.

Continue to keep the place close to ones water heater thoroughly clean of dirt. In particular if the water heater can be found in the garage area, be certain to keep the vicinity swept. The cleaner the heater is, the considerably better it is going to work without having the necessity of a water heater repair.

Replace Old Water Heaters With Energy Efficient Ones

Today, most water heaters made possess a fine volume of energy efficiency. In April of 2015, new codes were started in the United States on water heaters. Naturally, the better quality the heater, the longer the life one can get from the device while using appropriate care over time. Don’t wait to phone Hot Water Heater Repair Nashville to talk about water heater maintenance or simply to help answer any concerns on finding the most proper replacement water heater for ones house or workplace. Brand, model, and size ought to all be considered in the selection process and not simply implement the “bigger the better” saying. With regard to storage tank water heaters, one doesn’t need to be always holding a surplus quantity of heated up water that won’t be used.

Water Heater Troubleshooting Ideas

Hot water heaters are one of a household’s toughest functioning home appliances. Day or evening, it’s making completely heated water anytime you desire it. When it all of a sudden is no longer working adequately, many of us often overreact.

The good news is a nonfunctioning water heater does not constantly suggest an expensive repair work. Prior to making an emergency call to Water Heater Repair Nashville, we recommend inspecting the issue yourself first.

Nashville Water Heater Repair Troubleshooting

Check the Pilot Light

For a gas water heater, eliminate the small panel on the bottom of the system and examine to observe if the pilot light is illuminated.
Spark it with a match or lighter to re-ignite it. If it remains lit, the water heater must kick-in and begin functioning effectively.
If the pilot burner on the water heater does not remain ignited, you might have to change the thermocouple or have the burner cleaned.

Replace the ThermocoupleHot Water Heater Repair Nashville

It seems like a incredibly complex term, however it’s really an easy system that you can change on your water heater.

Refer to the owner’s handbook. It needs to have directions for how you can get rid of and change the thermocouple.
Shut off the gas prior to taking out anything at all from the water heater.
Using the guidelines in your individual’s guide, eliminate the thermocouple by removing it from both sides of the aviator line.
Change the thermocouple on the water heater with a brand-new one that is cut to length.
Turn on the gas and check for leakages, then re-light the pilot light.

Hit the Reset Button

If you have an electric water heater, find the reset button and push it till you notice a click.
If you do not notice a click, or it falls short to reboot the water heater, reset the breaker.
If a breaker reset does not do the technique, you could should change the thermostat.

Change the Thermostat

Turn off the power to the water heater, and switch over off the breaker it is linked to. You do not desire to electrocute yourself!
Use the owner’s handbook to find the thermostat wires, then detach them.
Eliminate the thermostat and have it checked by a home appliance dealership. If it is malfunctioning, change it.

Change the Heating Element

With the power still switched over off, get rid of the gain access to panel on the water heater.
Loosen the terminal screws and pull the wires far from the heating element.
Get rid of each element of the element and have them checked by a device repair shop. If they are damaged, change them.

Your water heater need to be going in no time. If these actions fall short to repair your hot water heater, or if you do not feel at ease doing them by yourself, call Hot Water Heater Repair Nashville TN.

Repairing a Noisy Nashville Water Heater

Water Heater Repair Nashville is regularly being consulted to check out at water heater. Popping and knocking noises can be a result of problems with the water heater, but it’s likewise an aggravation. We are going to go over the most typical reason your water heater may possibly begin creating noise and what you can possibly do to calm it down! Prior to consulting a Nashville professional, have a look at one of the most popular water heater troubles and remedies.

The most likely reason a water heater can make noise

Again, if the sound is an indicator of issues with the heater that difficulty is most probably sediment build up. The sediment arises from the water in the storage tank. It is essentially made of calcium and magnesium debris and is mainly a situation in residences which may have hard water.

If the sediment starts to accumulate at the bottom of the storage tank, it traps a little part of hot water under it. This triggers the hot water to boil as the tank functions. The sounds noticed are the bubbles popping through the sediment.

Furthermore, the sediment itself may very well be the factor for the sounds. The sediment sits at the bottom of the tank and can get burnt up producing unexpected sounds. And at times, the sediment will get carried up to the top of the tank and breaks off creating sounds as it plunges back down, bumping the sides on its way.


If sediment build-up is what’s producing the sounds, the heater should be examined. Hot Water Heater Repair Nashville can accomplish this and provide the tank a flush or advise a different remedy.

You can also hinder sediment build-up by having expert routine maintenance done on the storage tank at minimum annually. This system involves flushing the tank of any sediment.

An additional terrific approach is to add a water softener in your Nashville property. Water softeners take out minerals from the water prior to it entering the water heater, dramatically lowering sediment build up.

For more info about other probable problems and remedies provide Water Heater Repair Nashville TN a phone call!

Water Heater Repair Video Overview

We really enjoy the things we do here at Water Heater Repair Nashville and look forward to serving as many of our Nashville community as possible. We will continue to provide information on water heater maintenance right here in this blog too.

We would like to share our brand new company summary video to you below.

We are in addition readily available to support you with all other kinds of plumbing repair you might require completed. Whether a leaking faucet, drain cleaning, toilet repair, or leak detection. We have witnessed practically any sort of emergency plumbing and water heater repair scenario you can picture and look forward to employing our well crafted troubleshooting capabilities!

If you are believing it is becoming near requiring a water heater replacement contact us also, for we will do all we can to help support you in that circumstance.